RAM Mfg. Ltd 1-800-563-4382
Page 3/8
Previous Page (2 of 8)
Next Page (4 of 8)


FIG. 6A- LOWER THE HANDRAIL INTO PLACE
  • For a Straight Access Unit Mount the Solid Handrail to the Carriage as shown in Fig. 6A/6B
  • Fasteners- (4X) 5/16 X 1¾" Bolts, (8X) 5/16 Washers, (4X) 5/16 Locknuts)
  • For an Adjacent Access Unit Mount the Solid Handrail to the Carriage as shown in Fig. 7A/7B, the safety pan must be lowered to access the mounting holes. After mounting the Solid Handrail attach it to the Control Wall Extension using small 1" Angle, remount safety pan to finish
  • Fasteners- (3X) 3/8 X 1¼" Bolts, (3X) 3/8" Locknuts, (2X) 10/32 X ½" Screws



FIG. 6B- BOLT HANDRAIL TO CARRIAGE



FIG. 7A- LOWER SAFTEY PAN TO ACCESS BOLT HOLES

FIG. 7B- BOLT HANDRAIL TO CARRIAGE
Page 3/8
Previous Page (2 of 8)
Next Page (4 of 8)